jobs jobs

URGENT REQUIREMENT FOR A GLASS PROJECT IN QATAR

Post Title
URGENT REQUIREMENT FOR A GLASS PROJECT IN QATAR
Job List and Description Text
GLASS MACHINE OPERATORS / TECHNICIAN-10 nos 2000-2500 :

The candidate should have to 4 years experience in Architectural Glass industry. He Should be able to operate Grinding, Polishing, washing, Beveling and Sand blasting Machine. He must be Able to check measurements, check the quality of gass after production racking a transportation.

2 GLASS LAMINATION MACHINE OPERATOR-5 nos-1500-4500:

The candidate should have 3 to 4 years of experience in Architectural glass industry in preparatory processes such as washing and drying glass and films, the assembly and taying of package and degassing. Expenence in the Control Parameters such as the degree of depression biana temperature gradient, time for each operation and absolute temperature. Experience in bonding process: by heating of adhesive fim and pressing. Knowledge about the maximum presture to be applied. Knowledge about the cooling processes. Knowledge about the types of glass and films.

Knowledge about the masimum thick ness of glans. Calculation skill about Load versus Displacement piots. He should have the knowledge in Glass and Fim preparation, Assembly Steps and dearing step either by calendringer under vaccum

GLASS LAMINATION WASHING MACHINE OPERATOR-5 nos-2500-1000:

The candidate should have 3 to 4 years of experience in Architectural glass industry. He must have the knowledge of placing the glass on the fighting arms of the loading tabin and about the wheel shafts to the washing machine. He must have the knowledge about the function of Arushes and Air knives automatic adjustments according to the glass thickness. He must have the knowledge about the fitting sizes of glenn by the upper part of machines for cleaning and maintenance operation.

GLASS LAMINATION CLEAN ROOM ASSEMBLY TECHNICIAN-5 nos-2500-3000:

The candidate should have 3 to 4 years experience in Architectural Glass industry. He must have the knowledge of cantroling of temperature and humidity of air inside the lay-up room. He must be knowing the calculation about the provision of maintaining adequate space for assembly of the product and necessary POLYVINYL BUTRYRAL (PVB) Banding equipment. He must have the knowledge about the operation of Over Head Vaccum Device which lifts heavy and large sheets of glass to be the layup process. He must have the experience in handling the Layup Conveyor, Pop-up tables etc. with Computer Control. Knowledge about the entire production line such an Operator Interface and Touch Screen for Programmable Logic Controlers etc. Knowledge in handing Layup Conveyor with Pop-up table and Registration of Glass to align the layers of glass in the laminates. Experience in handling Trim Conveyor with Pop-up table to tra the excess PVB.

GLASS TEMPERING FURNACE OPERATOR-5 nos-3500-4000:

The candidate should have 3 to 4 years experience in Architectural Glasu industry. He Should be able to make the recipes (tempering parameter) for the various glasses Should have the owledge of edge preparation of the Pre Tempering. Should have the knowledge of the industry standards tolerances for the distortion levels, Breakage controling technics. Heat Strangther of Low E glasses with double silver and triple silver coating. Basic acceptance levels of holes & cut outs from the edge of the glass. Parving scheduling of production to achieve best output with maximum energy efficiency and minimize breakages. Opting the power consumption as to the production. Following and scheduling the routine maintenance and cleaning

AUTO CLAVE OPERATOR FOR LAMINATION MACHINE-5 nos-2500-1500:

The candidate should have 3 to 4 yaars experience in Architectural Glass industry, He must have the knowledge of Auto Clave operation. He munt have the knowledge of Auto Claving under heat and pressure. He must have the knowledge of Heating ramp rate, Cooiling ramp rate, cooling tower, Atro-refrigerator. Chiller Plate exchanger pressuring ramp rate, De-pressurization ramp rate, Heat soak test a process and analyze by pressure acum and temperature.

QC INSPECTOR FOR GLASS PROCESSING INDUSTRY-2 nos-5000:

The candidate should have 3 to 4 years experience in Architectural Glass industry. His Duty is to provide best quality in reduced operational costs. Experience in various Procens control and inspection Experienced in advanced inspection system penence & knowledge in the following areas. Test methods for external fire exposure, testing and classification of resistance against explosion pressure, determination of the bending strength of glass, determination of the emissivity, determination of thermal transmittance / U-value calculation method, 5000 determination of thermal transmittance U-value Heat Fow method. The candidate must posses knowledge about CE mark testing and certification processes. Must have the knowledge of Glass testing for any indoor and outdoor construction or building work such as glass for furniture, glass for greenhouses, special bend glass types for construction work, glass for kitchen and showers, glass for elevators etc. Knowiedge in Glass testing for sound hamers. FPC (Factory Production Control) Audits penodic quality control audits to comply with the required quality system.

Walk In Interview in Delhi
Jobs at Qatar
Interview Address and Contact Details
Delhi
Email
[email protected] / [email protected]
Interview Date
30-4-2021

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.